China Fuchuan Wire Annealing Machine
1. The annealer integral type, total thickness is 500mm, and 100mm
much thicker than general supplier’s design. The heat preservation
effect is good. This type can save 30% of electricity.
2. The annealer, oven and tinning furnace is tube type. Easy to
replace and maintenance.
3. The two ends of the furnace tube all ceramic sleeve design, to
prevent the wire be scratched.
4. The water tank is re-cycle design and with water tank and pump.
5. The two ends of the hauling drum with revolving joints and can
connect the re-cycle water for cooling.
6. The take up is 44 heads single layer design. Another four heads
is for prepare.
7. Is fit for human’s height. Can be operated easily.
8. The take up two ends is with clapboard design, to prevent broken
wire effect the connecting wires.
9. Below the annealing furnace and upper of the take up has lights
design, easy for workers to operate the wire.
|Twisting usage||Apply for the annealing of ultra-fine round copper wire and alloy
|Single wire dia(mm)||0.08～0.25mm/0.15～0.64mm|
|Max numbers of inlet wire||12||16||24||32||40|
|Pay off method||Brush pay off|
|Pay off bobbin model||300bobbin|
|Annealing furnace length||3.5m-6.0m|
|Annealing method||Tube annealing|
|Annealing protection method||Water seal protection|
|Tinned method||Hot dip|
|Capstan control method||Inverter+ motor control or adopt stepless speed regulation motor|
|Equipment total power||51KW||53KW||61KW||63KW||68KW|
|Take up control||Take up is voltage regulator control the moment motor|
|Take up bobbin size||5inch,8inch bobbin or 5inch,8inch,10inch bobbin,300 bobbin|
|Traverse control method||Stepless speed regulation motor+ turbine gear box control toothrow
|Installation size (mm)||13000*1500*2100||14500*1500*2100||18000*1500*2100||20000*1500*2100||24000*2200*2100|
Terms of payment:
30% down payment,70% before shipment
45days after receive the downpayment